Chinese (Simplified)EnglishFrenchGermanHindiItalianJapaneseKoreanPortugueseRussianSpanish

CAMUS

CAMUS Hydronics is a forward thinking world renowned manufacturer of Industrial, Commercial and Residential Boilers and Water Heaters

CAMUS DynaForce Condensing Boiler

The DynaForce has an efficiency rating of up to 99% and a heat exchanger which is constructed entirely of stainless steel. The DynaForce is available for Hydronic Heating and Domestic Hot Water heating and can be fired with both Natural Gas or Propane.

Models range from 300,000 up to 5 million Btu with a 5 to 1 turndown.

Standard Features

  • Up to 97% Efficiency
    • Typical thermal efficiency of 94% at high fire
    • Efficiency will depend on firing rate and inlet water temp.
  • Suitable Applications:
    • Dedicated Hydronic Heating
    • Dedicated DHW
  • Full Modulation, 5:1 Turndown
  • 1:1 Gas/Air Ratio control for perfect modulation throughout
  • On-board Regulator is Part of Gas Train
  • Honeywell SOLA Integrated Ignition Control Module with Touch Screen Display Standard on Dynaforce
  • Internal Condensate Collection and Neutralizer Reservoir
  • Direct Hot Surface Ignition : 300,000 to 2,500,000 BTU/hr
  • Proven Pilot Ignition: 3,000,000 to 5,000,000 BTU/hr
  • Max. Allowable Working Pressure of 160 PSIG
  • Max. Operating Outlet Water Temperature of 210oF
  • Metal Fiber Knit Burner
  • Extremely Low Noise Level of Operation
    • (<60 dba up to model DR-5000 )
  • Designed for Easy Access to Components For Maximum Serviceability

DynaForce Revolutionary Heat Exchanger

  • Fully Condensing All-Welded construction using 439 Stainless Steel for waterways and finned tubes
  • Loading on tubes allows for condensing efficiencies
  • Counter-flow concept
  • 8-Pass Design for models 300 to 1000
  • 12-Pass Design for models 1200 to 5000
  • Groove-lock water connection
  • Built-in Viton packing seals
  • Removable combustion chamber service panels
  • No lower restriction on inlet water temperatures
  • Not-Sensitive to high flow rates. No upper limit specified
  • Maintain temp rise across heat exchanger below 30 deg F
    • This  sets a limit on the minimum allowed flow rates
  • Required flow rates will be at least 20% more than current flow rates allowed on  similar sized Dynaflame

DynaFORCE Product Brochure